 |
|
|
As architects and interior designers, it is critical to have the details and technical specifications of all available products that you recommend and use at your fingertips.
For product and brand details, visit the Products Section.
Here are the technical details of each of our brand categories: |
|
|
| |
|
| |
| Plywood - Specifications |
Sl. No. |
Test Prescribed in IS:303-1993 |
Minimum Value for Conformity |
Observed Value |
1. |
Glue Shear Strength (in dry state) |
Avg. 1350 N
Min. Ind. 1100 N |
1485 N
3220 N |
2. |
Glue Shear Strength (in wet state) |
Avg. 1000 N
Min. Ind. 800 N |
1485 N
980 N |
3. |
Resistance to microorganisms |
Avg. 1000 N
Min. Ind. 800 N |
1180 N
1020 N |
4. |
Moisture Content Test |
Not less than 5%
Not more than 15% |
7.5% |
|
| |
Features
- Resistant to boiling water, moisture, dry heat, termite, insects and pests.
- Remains unaffected by changing weather conditions.
Precautions
- Green BWR Plywood should be stored in a well ventilated and dry place to prevent fungus, insect and borer attacks.
- It should be stored properly in stacks on a flat level to prevent warping, bending or twisting.
- It should be kept away from extreme heat and sunlight to prevent discolouration and other damage.
- Good quality synthetic resin adhesive should be used for proper bonding of Greenply with Green Decorative Plywood or Greenlam.
- Fine-toothed cross cut saws should be used for sawing/cutting Greenply.
|
| |
| Green Flush Door - Specifications |
Sl. No. |
Tests Prescribed in
IS:2202 (PART - 1): 1999 |
Minimum Value for Conformity |
Observed Value |
1. |
Glue Shear Strength (in dry state) |
Avg. 1350 N
Min. Ind. 1100 N |
1485 N
3220 N |
2. |
Glue Shear Strength (in wet state) |
Avg. 1000 N
Min. Ind. 800 N |
1485 N
980 N |
3. |
Resistance to microorganisms |
Avg. 1000 N
Min. Ind. 800 N |
1180 N
1020 N |
4. |
Moisture Content Test |
Not less than 5%
Not more than 15% |
7.5% |
|
|
| |
| Laminates - Specifications |
Sl. No. |
Properties |
Unit |
Specified Values as per IS: 2046-1995, Type: S, HGS |
Greenlam Conforms |
| 1. |
Thickness |
mm |
1.00 ± 10% |
|
| 2. |
Resistance to dry heat at 180° C |
Grade |
Not worse than 4 |
|
| 3. |
Resistance to surface wear |
|
|
|
| 4. |
Resistance to immersion in boiling water |
| |
a) Mass increase
b) Thickness increase
c) Appearance |
%
%
Grade |
10.0 (Max.)
11.8 (Max.)
Not worse than 4 |
|
| 5. |
Dimensional stability at deviated temperature |
| |
a) Longitudinal
b) Transverse |
%
% |
0.55 (Max.)
1.025 (Max.) |
|
| 6. |
Dimensional stability at 20° C |
| |
a) Longitudinal
b) Transverse |
%
% |
0.375 (Max.)
0.60 (Max.) |
|
| 7. |
Resistance to impact by small diameter ball |
N |
20.0 (Min.) |
|
| 8. |
Resistance to cracking |
Grade |
Not worse than 4 |
|
| 9. |
Resistance to scratching |
N |
2.0 (Min.) |
|
| 10. |
Resistance to staining |
Grade |
Not worse than 5 |
|
| 11. |
Resistance to colour change |
| |
a) In Xenon Arc light
b) In enclosed Carbon Arc Light |
Grade
Grade |
Not worse than 6
Not worse than 5 |
|
| 12. |
Resistance to cigarette burns |
Grade |
Not worse than 3 |
|
| 13. |
Resistance to steam |
Grade |
Not worse than 4 |
|
|
| |
|
| |
| Decorative Veneers - Specifications |
1. |
Open splits, checks or open joints |
Not more than 150 mm in length and 0.5 mm in width rectified with veneer insert bonded with synthetic resin adhesive. |
2. |
Torn grain, dead knots, dote |
Free from such defects, as well as discolouration and sapwood |
3. |
Moisture content |
>5, <15 |
|
| |
Features
- Wide range of designs, colours, shades and grains.
- Superior surface finish.
- Use of Gurjan Core to make it borer and termite resistant.
- Better glue shear strength ensures good bonding.
Precautions
- Green Decorative Plywood should be stored in well ventilated and dry places to prevent fungus, insect and borer attack.
- It should be stored properly in stacks on a flat level to prevent warping, bending or twisting.
- Good quality synthetic resin adhesive should be used for joining Green Decorative Plywood with Greenply.
- Green Decorative Plywood should be cleaned properly with a soft and clean cloth before applying varnish and polish.
- For clear finishing of Green Decorative Plywood, the following processes must be used:
a. Bleaching b. Cleaning c. Staining d. Filling e. Sealing f. Colour matching g. Coating h. Rubbing j. Polishing.
|
| |
|
| |
| Particle Boards/MDF - Specifications |
Sl. No. |
Properties |
Unit |
Specified Values as per IS: 2046-1995, Type: S, HGS |
Greenlam Conforms |
| 1. |
Density |
Kg/M3 |
500 - 900 |
|
| 2. |
Moisture Content |
% |
>5,< 15 |
|
| 3. |
Water Absorption |
| |
a) 2 hrs.
b) 24 hrs. |
%
% |
15 (Max.)
30 (Max.) |
|
| 4. |
Thickness swelling in two hours. |
% |
8 (Max.) |
|
| 5. |
Modulus of Rupture |
N/mm2 |
11 (Min.) |
|
| 6. |
Tensile strength perpendicular to surface |
N/mm2 |
0.3 |
|
| 7. |
Screw withdrawal strength |
| |
a) Face
b) Edge |
N
N |
1250 (Min.)
750 (Min.) |
|
| 8. |
Resistance to steam |
|
Should pass test |
|
| 9. |
Resistance to cracking |
|
Should pass test |
|
| 10. |
Resistance to cigarette burns |
|
Should pass test |
|
| 11. |
Resistance to stain |
|
Should pass test |
|
|
| |
| Particle Boards/MDF - Specifications |
Sl. No. |
Properties |
Unit |
Specified Values as per IS: 2046-1995, Type: S, HGS |
Greenlam Conforms |
| 1. |
Density |
Kg/M3 |
500 - 900 |
|
| 2. |
Moisture Content |
% |
>5,< 15 |
|
| 3. |
Water Absorption |
| |
a) 2 hrs.
b) 24 hrs. |
%
% |
9 (Max.)
18 (Max.) |
|
| 4. |
Thickness swelling in two hours. |
% |
7 (Max.) |
|
| 5. |
Modulus of Rupture |
N/mm2 |
28 (Min.) |
|
| 6. |
Tensile strength perpendicular to surface |
N/mm2 |
0.7 |
|
| 7. |
Screw withdrawal strength |
| |
a) Face
b) Edge |
N
N |
1500 (Min.)
1250 (Min.) |
|
| 8. |
Resistance to steam |
|
Should pass test |
|
| 9. |
Resistance to cracking |
|
Should pass test |
|
| 10. |
Resistance to cigarette burns |
|
Should pass test |
|
| 11. |
Resistance to stain |
|
Should pass test |
|
|
| |
Features
- 3 layered particle board.
- High abrasion resistant.
- Resistance to steam and stains.
- Does not warp or sag.
- Surface counter balanced for greater stability.
- Strong and durable.
- Termite, fungus & borer proof.
- Holds screws well.
- Requires no special tools for machining etc.
Precautions
- Do not use coarse ripsaws.
- Timber beading of minimum 6mm thickness is suggested when mechanical fasteners are to be fitted on the edges to protect from excessive wear and tear.
- Always follow the adhesive manufacturers' instructions.
- In conditions of extreme humidity, use of rubber based adhesive is recommended.
|
| |